Replacement window · 330 Series Part S34000

Sellstrom 330 Series High Heat Window

Name: Sellstrom 330 Series High Heat Window
SKU: SS-54471
Price: 24.99 USD
Availability: InStock
Rating: 5 (1 reviews)

5.0 (1)

$24.99

ANSI Z87.1
CSA Z94.3

The button opens this exact part at our retail partner, where the price is confirmed and you check out.

Fits Sellstrom 330 Series High Heat face shields
Clear window, 8 by 19 inches
Window 0.040 inch thick, cut to fit
Marked to ANSI Z87.1 and CSA Z94.3

Tall clear window for the 330 high heat shield

Splash, flying chips and fine particles leave their marks on a window long before the rest of a face shield wears out. This clear replacement window is cut for our 330 Series High Heat face shields, 8 inches wide, 19 inches tall and 0.040 inch thick, so you can put a fresh view back in the shield you already own. It is marked to ANSI Z87.1 and CSA Z94.3.

Change it when scratches or pitting start to blur the work in front of you. Remove the old window from the 330 frame, fit the new one in the same position, and check that it sits evenly before you go back to the job. The window is a part only, so the shield itself is sold separately. Keep your safety glasses on under it.

The 330 Series High Heat Window is on the Face shields shelf of the Sellstrom lineup.

ShelfFace shields
TypeReplacement window
Series330 Series
Part numberS34000
TintClear
Size8" x 19"
Standards named for this partANSI Z87.1, CSA Z94.3

Before you start

A face shield goes over safety glasses or goggles, never instead of them. OSHA's guide says a shield alone does not stop an impact, and a pitted or scratched window is the cue to replace it.

This is general information about choosing protective equipment, not a hazard assessment of your workplace and not medical advice. Your employer's assessment, the markings on the product and its instructions come first; after any injury to the eye, get medical help right away.

What the safety sources say

OSHA Publication 3151: Personal Protective Equipment. Describes safety spectacles, goggles, welding shields and face shields, and says face shields protect against splashes and sprays but not adequately against impact, so worn with goggles or safety spectacles they give added protection. It also says hearing protector makers must print the NRR on the packaging and that glasses, facial hair or long hair can reduce the protective value of earmuffs. Read October 2, 2026.
OSHA, 29 CFR 1910.133: Eye and face protection. Employers must ensure appropriate eye or face protection against flying particles, molten metal, liquid chemicals, chemical gases or vapors and injurious light radiation, with side protection against flying objects, and filter lenses must carry a shade number suited to the work. Devices must meet ANSI/ISEA Z87.1-2010, Z87.1-2003 or Z87.1-1989 (R-1998), and the table sets minimum shades such as 10 for gas metal arc welding at 60 to 160 A and 14 for carbon arc welding. Read October 2, 2026.

Each of these sources is linked in our eye and face protection guide.

2 options
Face shield · 300 Series

Sellstrom 301 Clear Face Shield

Clear · Polycarbonate

ANSI Z87+
CSA Z94.3

4.4 (5,412)

from $16.15
6 options
Face shield · 390 Series

Sellstrom 390 Series Single Crown Face Shield

Clear · Acetate

ANSI Z87+
CSA Z94.3
ANSI Z87.1

4.4 (1,552)

from $21.95
7 options
Replacement window · 390 Series

Sellstrom 390 Series Replacement Window

Polycarbonate

ANSI Z87+
CSA Z94.3

4.7 (1,022)

from $10.69
4 options
Face shield · DP4

Sellstrom DP4 Face Shield

Polycarbonate · anti-fog

ANSI Z87.1
CSA Z94.3
ANSI Z87+

4.7 (916)

from $41.49
Face shieldsAll face shields29 products from $4.91See the shelf

Sellstrom 330 Series High Heat Window

Tall clear window for the 330 high heat shield

Before you start

Also on the Sellstrom face shields shelf