Face shield Part S31140

Sellstrom Dual Crown Face Shield, White Crown

Name: Sellstrom Dual Crown Face Shield, White Crown
SKU: SS-84566
Price: 43.06 USD
Availability: InStock
Rating: 4.3 (3 reviews)

4.3 (3)

$43.06

ANSI Z87+
CSA Z94.3

The button opens this exact part at our retail partner, where the price is confirmed and you check out.

Dual crown with polycarbonate chin guard
Clear window with anti-fog coating
Ratchet headgear with twist knob, made in USA
Marked to ANSI Z87+ and CSA Z94.3

White dual crown shield with an anti-fog window

Two crowns hold this window: one at the brow and one over the top of your head, which keeps the shield steady when you lean over a brazing joint or tilt down to a cutting line. We build the white crown and chin guard from high impact polycarbonate and make the whole shield in the USA. The clear window carries an anti-fog coating that helps in warm, humid rooms, and it curves with your face against splashes, particles and flying debris.

The shield comes assembled on ratchet headgear, and a twist knob sets the height and fit. You wear your safety glasses underneath it. When the window scratches, you replace the window, not the shield, because every part is sold on its own. It is part S31140, marked to ANSI Z87+ and CSA Z94.3.

The Dual Crown Face Shield, White Crown is on the Face shields shelf of the Sellstrom range.

ShelfFace shields
TypeFace shield
Part numberS31140
MaterialPolycarbonate
TintClear
CoatingAnti-fog
MountingRatchet headgear
Standards named for this partANSI Z87+, CSA Z94.3

Before you start

A face shield goes over safety glasses or goggles, never instead of them. OSHA's guide says a shield alone does not stop an impact, and a pitted or scratched window is the cue to replace it.

This is general information about choosing protective equipment, not a hazard assessment of your workplace and not medical advice. Your employer's assessment, the markings on the product and its instructions come first; after any injury to the eye, get medical help right away.

What the safety sources say

OSHA Publication 3151: Personal Protective Equipment. Describes safety spectacles, goggles, welding shields and face shields, and says face shields protect against splashes and sprays but not adequately against impact, so worn with goggles or safety spectacles they give added protection. It also says hearing protector makers must print the NRR on the packaging and that glasses, facial hair or long hair can reduce the protective value of earmuffs. Read October 2, 2026.
OSHA, 29 CFR 1910.133: Eye and face protection. Employers must ensure appropriate eye or face protection against flying particles, molten metal, liquid chemicals, chemical gases or vapors and injurious light radiation, with side protection against flying objects, and filter lenses must carry a shade number suited to the work. Devices must meet ANSI/ISEA Z87.1-2010, Z87.1-2003 or Z87.1-1989 (R-1998), and the table sets minimum shades such as 10 for gas metal arc welding at 60 to 160 A and 14 for carbon arc welding. Read October 2, 2026.

Each of these sources is linked in our eye and face protection guide.

Replacement window

Sellstrom Flip Window, Shade 5 IR

Shade 5 IR · Polycarbonate · 8" x 8"

ANSI Z87+
CSA Z94.3

4.3 (91)

$21.19
2 options
Face shield

Sellstrom Single Crown Hard Hat Face Shield

Clear · anti-fog

ANSI Z87+
CSA Z94.3

4.0 (85)

from $50.80
4 options
Face shield

Sellstrom Dual Crown Face Shield with Chin Guard

Clear · Polycarbonate · anti-fog

ANSI Z87+
CSA Z94.3

4.2 (58)

from $44.15
Arc flash rated

Face shield

Sellstrom Arc Flash Dual Crown Face Shield

Green · Polycarbonate

4.3 (12)

from $93.39
Face shieldsAll face shields29 products from $4.91See the shelf

Sellstrom Dual Crown Face Shield, White Crown

White dual crown shield with an anti-fog window

Before you start

Also on the Sellstrom face shields shelf