Face shield Part S32012

Sellstrom Single Crown Hard Hat Face Shield

4.0 (85)

$50.80

$50.80 to $70.59 across tint options

ANSI Z87+
CSA Z94.3

Tint: Clear

ClearShade 5

The button opens this exact part at our retail partner, where the price is confirmed and you check out.

Universal adapters fit most slotted hard hats
Curved polycarbonate window with anti-fog coating
Clear, or Clear with a Shade 5 IR flip front
Shield only, your hard hat is not included

Slot mounted face shield for your hard hat

Where the hard hat never comes off, a face shield has to ride on it. This one clips into the slots of most slotted hard hats with the universal adapters in the box, so your face, chin and eyes sit behind a curved polycarbonate window while the hat stays on your head. The window blocks 99% of UV and carries an anti-fog coating that helps in humid plants.

Pick Clear for grinding, chipping and chemical splash. The Shade 5 version adds a spring mounted Shade 5 IR flip front for oxy-acetylene cutting and brazing, which you lift between cuts and drop for the flame. It is not an arc welding filter. Your hard hat is not included, and your safety glasses stay on underneath. This shield is marked ANSI Z87+ and CSA Z94.3.

The Single Crown Hard Hat Face Shield is on the Face shields shelf of the Sellstrom protection range.

ShelfFace shields
TypeFace shield
Part numbers2, listed under Options
ShadeShade 5
CoatingAnti-fog
MountingSlots on a hard hat
Standards named for this partANSI Z87+, CSA Z94.3
Tint optionsClear, Shade 5

Every Sellstrom Single Crown Hard Hat Face Shield option in our last catalog update
Part no.	Tint	Price
S32012	Clear	$50.80
S32152	Shade 5	$70.59

Before you start

IR tinted windows, visors and lenses are for torch work: brazing, gas welding and oxygen cutting. They are not a filter for an electric arc, where the OSHA table starts at Shade 7.

This is general information about choosing protective equipment, not a hazard assessment of your workplace and not medical advice. Your employer's assessment, the markings on the product and its instructions come first; after any injury to the eye, get medical help right away.

What the safety sources say

OSHA, 29 CFR 1910.133: Eye and face protection. Employers must ensure appropriate eye or face protection against flying particles, molten metal, liquid chemicals, chemical gases or vapors and injurious light radiation, with side protection against flying objects, and filter lenses must carry a shade number suited to the work. Devices must meet ANSI/ISEA Z87.1-2010, Z87.1-2003 or Z87.1-1989 (R-1998), and the table sets minimum shades such as 10 for gas metal arc welding at 60 to 160 A and 14 for carbon arc welding. Read October 2, 2026.
OSHA, 29 CFR 1910.252: Welding, cutting and brazing, general requirements. Helmets or hand shields must be used during all arc welding or arc cutting except submerged arc welding, and goggles or other suitable eye protection during gas welding or oxygen cutting. Helmets and hand shields must insulate against heat and electricity and protect the face, neck and ears from direct radiant energy from the arc. Read October 2, 2026.

Each of these sources is linked in our welding shade guide.

Replacement window

Sellstrom Flip Window, Shade 5 IR

Shade 5 IR · Polycarbonate · 8" x 8"

ANSI Z87+
CSA Z94.3

4.3 (91)

$21.19
4 options
Face shield

Sellstrom Dual Crown Face Shield with Chin Guard

Clear · Polycarbonate · anti-fog

ANSI Z87+
CSA Z94.3

4.2 (58)

from $44.15
Arc flash rated

Face shield

Sellstrom Arc Flash Dual Crown Face Shield

Green · Polycarbonate

4.3 (12)

from $93.39
Arc flash rated
Replacement window

Sellstrom Arc Flash Replacement Window

Green · Polycarbonate · 8" x 15"

NFPA 70E

5.0 (9)

from $52.87
Face shieldsAll face shields29 products from $4.91See the shelf

Sellstrom Single Crown Hard Hat Face Shield

Slot mounted face shield for your hard hat

Before you start

Also on the Sellstrom face shields shelf